Drilling and milling unit MICROMOT 60/EF

31,44 €
incl. 19% VAT , plus shipping costs
Manufacturers recommended retail price: 35,50 €
(Save 11.44%, i.e. 4,06 €)
Item available
Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)
pc
Description

Das Bohr- und Fräsgerät MICROMOT 60/EF von PROXXON mit Schnellspannfutter. Praktisch beim Arbeiten mit unterschiedlichen Schaftmessern. Schlank, handlich und leicht. Schnellspannfutter von 0,3 - 3,2 mm. Vorteilhaft vor allem beim Arbeiten mit Einsatzwerkzeugen mit unterschiedlichen Durchmessern, z.B. mit HSS-Bohrern. Elektronische Drehzahlregelung mit Feedback-Effekt (hohe Durchzugskraft im unteren Drehzahlbereich). Balancierter DC-Spezialmotor, kräftig, leise, langlebig. 20 mm-Systempassung zum Anflanschen von MICROMOT-Zubehör. Stabiles Gehäuse aus glasfaserverstärktem POLYAMID. Mit angenehmer Weichkomponente im Griffbereich.

Anwendungsbereich: Zum Bohren, Fräsen, Schleifen, Polieren, Bürsten, Trennen und Gravieren

Highlights:

  • Schnellspannfutter
  • 20 mm-Systemfassung. Zum Anflanschen von MICROMOT-Zubehör.
  • Gehäuse aus glasfaserverstärktem POLYAMID

Material: Gehäuse: glasfaserverstärktes POLYAMID

Technische Daten:

  • Gleichspannung 12 - 18 V. Leistungsaufnahme bis 40 W.
  • 5.000 - 20.000/min.
  • Länge: 220 mm.
  • Gewicht: 230 g.
  • Zum Betrieb wird ein Netzteil benötigt. Hier empfehlen wir PROXXON MICROMOT-Netzgeräte ab einer Leistung von 2,0 A

Inhalt: Bohr- und Fräsgerät, Schnellspannfutter


  • Shipping weight: 0,40 kg
  • Item weight: 0,39 kg
Suitable for this article
Cotton disc, Ø 22 mm, 2 pieces
In stock
Drilling jig BV 2000
Diamond coated mounted points, ball Ø 1.2 mm, 2...
In stock
Diamond-coated mounted points, ball Ø 2.2 mm, 2...
Diamond coated mounted points, ball Ø 3.2 mm, 2...
In stock
Diamond twist drill, one each 0.8 and 1.2 mm
In stock
Diamond cut-off wheel with cooling holes, Ø 20 mm...
In stock
Diamond cut-off wheel with cooling holes, Ø 38 mm...
In stock
Diamond cut-off wheel, Ø 20 mm + 1 carrier
In stock
Diamond cut-off wheel, Ø 38 mm + 1 carrier
In stock
Diamond grinding pencil, lens, 5.0 mm
In stock
Diamond grinding pencil, cylinder, 1.8 mm
In stock
Diamond grinding points, ball, 1.0 mm, 2 pieces
In stock
Diamond grinding points, ball, 1.8 mm, 2 pieces
In stock
Three-jaw drill chuck, clamping range 0.3 to 3.2 mm
In stock
Aluminium oxide grinding wheels (cone), 5 pcs.
In stock
Aluminium oxide grinding wheels (ball), 3 pcs.
In stock
Aluminium oxide grinding wheels (ball), 5 pcs.
In stock
Aluminium oxide grinding wheels (wheel), 3 pcs.
In stock
Aluminium oxide grinding wheels (wheel), 5 pieces
In stock
Aluminium oxide grinding wheels (cylinder), 3 pieces
In stock
Aluminium oxide grinding wheels (cylinder), 5 pieces
In stock
Corundum grinding wheels, Ø 22 mm, 10 pieces with...
In stock
Spare grinding belts Ø 10 mm, grit 150, 10 pieces
In stock
Spare abrasive belts Ø 14 mm, grit 120, 10 pieces
In stock
Spare grinding caps Ø 9 mm, grit 80 and grit 150,...
In stock
Spare grinding wheels Ø 18 mm, 10 each grit 120 + 150
In stock
Spare carrier, 5 pieces
In stock
flap disc, 20 x 10 mm, corundum
In stock
flap disc, 30 x 10 mm, corundum
In stock
Fine milling set (tungsten-vanadium steel), 3-pcs....
In stock
Felt polishing wheel, Ø 22 mm, 2 pieces
In stock
Felt polishing pin, bullet, 2 pieces
In stock
Felt polishing pin, wheel, 2 pieces
In stock
Felt polishing pen, cylinder, 2 pieces
In stock
Felt wheels, Ø 22 mm, 10 pieces + 1 carrier
Felt wheels, Ø 22 mm, 10 pieces + 1 carrier
In stock
Flame cutter (tungsten vanadium steel), 6 mm, 2 pieces
In stock
Fabric cutting disc, Ø 38 mm, 20 pieces
In stock
Fabric cut-off wheel, Ø 38 mm, 5 pieces + 1 carrier
In stock
Cone cutter (tungsten vanadium steel), 6 mm, 2 pieces
In stock
Corundum-bonded cutting discs, Ø 38 mm, 25 pieces
In stock
ball nose end mill (tungsten vanadium steel), 6 mm, 2 pieces
In stock
MICROMOT bending shaft 110/BF
In stock
MICROMOT bending shaft MBW 110/P
In stock
MICROMOT drill stand MB 200
MICROMOT steel collets, 6 pieces from 1 to 3.2 mm, with...
In stock
MICROMOT extension cable, 300 cm
In stock
Power supply unit NG 2/S
In stock
Power supply unit NG 5/E
Brushes, stainless steel, Ø 8 mm, 2 pieces
In stock
Brushes, brass, Ø 8 mm, 2 pieces
In stock
Brushes, steel, 8 mm, 2 pieces
In stock
Polishing complete set, 10 pieces
In stock
Polishing wheels, 14 x 12 mm, 2 pieces
In stock
Wheel brushes, stainless steel, Ø 22 mm, 5 pieces...
In stock
Wheel brushes, brass, Ø 22 mm, 5 pieces + 1 carrier
In stock
Wheel brushes, steel, 22 mm, 5 pieces + 1 carrier
In stock
Side milling cutter (tungsten vanadium steel), 10 mm, 2...
In stock
Grinding belts Ø 10 mm, 10 pieces grit 150, with...
In stock
Sanding belts Ø 14 mm, 10 pieces grit 120, with...
Sanding belts Ø 14 mm, 10 pieces grit 120, with...
In stock
Nylon fleece abrasive brushes, 1 each coarse and fine
In stock
grinding caps Ø 9 mm, 5 each grit 80 + 150, with...
In stock
Grinding wheels Ø 18 mm, 5 each grit 120 + 150,...
In stock
Silicon carbide grinding wheels, Ø 22 mm, 10...
In stock
Silicon carbide grinding pencils, 2 pieces
In stock
Silicon carbide mounted points, lens, 2 pieces
In stock
Silicone polishing wheel lens, Ø 22 mm, 10 pieces...
Silicone polishing wheel lens, Ø 22 mm, 10 pieces...
In stock
Silicone polishing wheel, Ø 22 mm, 10 pieces with...
Silicone polishing wheel, Ø 22 mm, 10 pieces with...
In stock
Silicone polisher, bullet shape, 5 pieces
In stock
Special polishing discs, Ø 22 mm, 4 pieces with...
In stock
Cup brushes, stainless steel, Ø 13 mm, 2 pieces
In stock
Cup brushes, brass, Ø 13 mm, 2 pieces
In stock
Cup brushes, steel, 13 mm, 2 pieces
In stock
Cut-off saw blades, 1 each 16, 19, 22 mm + 1 carrier
In stock
Cut-off wheels with fabric, Ø 22 mm, 10 pieces + 1...
In stock
Cut-off wheels with fabric, Ø 22 mm, 50 pieces
In stock
Cut-off wheels, Ø 22 mm, 10 pieces + 1 carrier
In stock
Cutting discs, Ø 22mm, 50 pieces
In stock
Cutting discs, Ø 38 mm, 5 pieces + 1 carrier
In stock
Universal holder UHZ with clamp
In stock
Tool set for glass processing (4 pieces)
In stock
Tool set for model makers (13 pieces)
Suede polishing wheel, Ø 22 mm, 2 pieces
In stock
Tungsten carbide cut-off wheel, Ø 20 mm + 1 carrier
In stock
Cylindrical milling cutter (tungsten vanadium steel), 3...
In stock
Cylinder cutter (tungsten vanadium steel), 8 mm, 2 pieces
In stock
Suitable power supply units
Foot switch FS
In stock
Foot switch FS
17,78 € *
Power supply unit NG 2/E
In stock
Power supply unit NG 2/S
In stock
Power supply unit NG 5/E
Others also bought:
Diamond grinding points, ball, 1.0 mm, 2 pieces
In stock
MICRO twist drill (HSS steel), 0.5 mm, 3 pieces
In stock
Diamond grinding points, ball, 1.8 mm, 2 pieces
In stock
Rubber plates for excavator tracks
Rubber plates for excavator tracks
In stock
HSS twist drill set, DIN 338, 0.3 to 3.2 mm (10 pieces)
In stock
Fine milling set (tungsten vanadium steel), 5-pcs....
Out of stock
Loading ...