Description
The inserts for hollow tires of the "anti-flat foot"-series increase the stability of the hollow tires. The inserts are made of a special elastomer in Germany and are easily used in existing hollow tubular tires. When choosing the correct insert, pay attention to the outer diameter of the tire and the outer diameter of the rim. Thanks to the large area of contact between insert, tire and rim, not only the stability of the tire is significantly improved but also a significantly higher torque can be transferred from the rim to the tire. The tire must therefore usually no longer be glued to the rim! The best results are achieved with aluminum rims with a smooth outer surface.
Variant names: "outer diameter tire" - "outer diameter rim"
Recommendations for common tire types:
-
Variant 73-40
Content: 8 + 4 inserts
Application: 2 + 1 inserts per tire - 1 set is enough for 4 tires
Fits: Tires in 1/14.5 - 1/16 (e.g., Veroma® 1/16, ScaleArt®, Wedico®) with 73mm outer diameter on rim with 40mm outer diameter and center bar. For all road or off-road tires, as well as standard or wide tires. -
Variant 83-47:
Content: 10 inserts
Application: up to 5 inserts for wide tires, up to 3 inserts for standard tires
Fits: tires in Tamiya® size (83mm) on standard plastic rim, Veroma® / Carson® rim with 47mm outer diameter -
Variant 83-49:
Content: 10 inserts
Application: up to 5 inserts for wide tires, up to 3 inserts for standard tires
Fits: tires in Tamiya® size (83mm) tires on Veroma® / Carson® rim with 49mm outer diameter - e.g. Veroma® / Carson® tipping trailer
Not the right variant? Talk to us - the inserts can be customized if necessary.
- Scale / compatible to: 1/14.5 (e.g. ScaleArt®)1/14 (e.g. Tamiya®)1/16 (e.g. Wedico®)1:13 - 1:16 Universal
- Shipping weight: 0,15 kg
- Item weight: 0,15 kg
