This trailer fender for double tires is manufactured as a high-quality resin vacuum casting and is suitable for models in 1:16 - 1:14.5 with a wheel diameter of approx. 52mm.
Like the original, the fender is attached to the support rods with clamping plates. The support rods are screwed to the frame of the trailer. As standard, the clamping plates are bolted to the fenders using M1.6 screws. For the highest level of detail, the scale mounting kit with super-fine M1 screws can be used as an option.
Optionally, the fender can also be equipped with a rubber splash guard (see "suitable for this article").
Note on the manufacturing process: Resin castings are supplied unpainted and with sprue. The sprue must be removed and sanded. Before painting, the parts should be cleaned with silicone remover.
